How to setup your Woom 4 & 5 handlebars
![Step 1](/_next/image?url=https%3A%2F%2Fwww.datocms-assets.com%2F75508%2F1704973711-1.jpg%3Fdpr%3D0.25%20200w%2Chttps%3A%2F%2Fwww.datocms-assets.com%2F75508%2F1704973711-1.jpg%3Fdpr%3D0.5%20400w%2Chttps%3A%2F%2Fwww.datocms-assets.com%2F75508%2F1704973711-1.jpg%3Fdpr%3D0.75%20600w%2Chttps%3A%2F%2Fwww.datocms-assets.com%2F75508%2F1704973711-1.jpg%20800w&w=3840&q=75&dpl=dpl_fDdqouLfgRk3sCJ73EoQhZmq1PzB)
1
Take the bike out of the box.
![Step 2](/_next/image?url=https%3A%2F%2Fwww.datocms-assets.com%2F75508%2F1704973756-2.jpg%3Fdpr%3D0.25%20200w%2Chttps%3A%2F%2Fwww.datocms-assets.com%2F75508%2F1704973756-2.jpg%3Fdpr%3D0.5%20400w%2Chttps%3A%2F%2Fwww.datocms-assets.com%2F75508%2F1704973756-2.jpg%3Fdpr%3D0.75%20600w%2Chttps%3A%2F%2Fwww.datocms-assets.com%2F75508%2F1704973756-2.jpg%20800w&w=3840&q=75&dpl=dpl_fDdqouLfgRk3sCJ73EoQhZmq1PzB)
2
Locate the screws on the headset.
3
Using an Allen key loosen the 2 screws at the headset.
4
Twist the handlebars 90 degrees anti-clockwise til they face forward.
![Step 5](/_next/image?url=https%3A%2F%2Fwww.datocms-assets.com%2F75508%2F1704974090-5.jpg%3Fdpr%3D0.25%20200w%2Chttps%3A%2F%2Fwww.datocms-assets.com%2F75508%2F1704974090-5.jpg%3Fdpr%3D0.5%20400w%2Chttps%3A%2F%2Fwww.datocms-assets.com%2F75508%2F1704974090-5.jpg%3Fdpr%3D0.75%20600w%2Chttps%3A%2F%2Fwww.datocms-assets.com%2F75508%2F1704974090-5.jpg%20800w&w=3840&q=75&dpl=dpl_fDdqouLfgRk3sCJ73EoQhZmq1PzB)
5
Make sure the handlebar looks the same as this picture, and the brake cables aren't twisted.
6
Using an Allen key tighten the 2 loose screws in the headset, keep your handlebars and wheel as straight as possible.
7
To adjust the height and angle, loosen the two screws on the handlebar.
8
Raise or lower to your child's desired height.
9
Finally tighten again and off you go!