How to setup your Frog bike

Take the bike out of the box.

Using an Allen key, loosen the 2 screws at the headset.

With one hand on the handlebars and the other on the front wheel, twist the wheel so the brake pads are facing forward and the brakes cables aren’t twisted.

Make sure the brake pads are in the same position as the picture.

With the front wheel between your legs, turn the handlebars 90 degrees until they are facing forwards.

Using an Allen key tighten the 2 loose screws in the headset, keep your handlebars and wheel as straight as possible.

Check the stem of the pedals to see which is Left and Right.

To secure the pedals screw the Left pedal Anticlockwise and the Right pedal Clockwise to tighten.

To finally secure the pedals, tighten the nut with a spanner.