HOW TO FIT MUDGUARDS - FROG 40-48

Fitting mudguards to your Frog 40-48 bike

Installing your new Frog bike’s mudguards is probably the hardest part of setting up your bike.

Checking your mudguard's parts:

The first stage is ensuring that you have the right parts to fit your mudguards:

Fitting your front mudguard:

Tool required: Phillips Screwdriver & Spanner

1. It’s time to install the first mudguard: place the mudguards between the fork legs, ensuring that one metal tab is placed in front of the fork, with the other behind it:

2. Make sure that the shorter end of the mudguard is pointing forward, like this:

3. Use the long Phillips bolt to fix the mudguard onto the fork leg, ensuring that there is a washer in front of each metal tab:

4. With your mudguard positioned centrally and with sufficient clearance between the mudguard and the tyre, tighten the bolt using a 10mm spanner and a Phillips screwdriver

Fitting your rear mudguard:

Tool required: Phillips Screwdriver & Spanner

So, that’s your front mudguard fitted. All that’s left to do now is to install the rear mudguard:

1. Place the rear mudguard between the stays, as the picture shows:

2. Using the short Phillips bolt, fix the mudguard onto the strut connecting the two seat stays.

3. There should be a washer between the metal tab and lock nut and also between the metal tab and the head of the bolt.

4. With your mudguard positioned centrally and with sufficient clearance between the mudguard and the tyre, tighten the bolt using a 10mm spanner and a Phillips screwdriver:

Splatter free riding

And that's it! Your mudguards have been set up and your bike is ready to go whatever the weather!

If you require more help with setting up your new kids subscription bike, don't hesitate to contact the Bike Club team. Get in touch via live chat or email: info@bikeclub.com